RB-2109M*

Screen Shot 2015-04-17 at 12.04.51 PM
Product Description
A white, water-borne, polyvinyl acetate emulsion adhesive.
Suggested uses
Clean machining, excellent wet tack, dries clear with good mileage per wet lb. Conforms to FDA regulations 21 CFR 175.105
Characteristics
Label and single face laminating.
Typical Physical Properties                                                  HMIS
Viscosity…………………… 1,300-1,500 cps               Viscosity…..…. 1            
pH…………………………… 4.5-5.5                                 pH………………. 0 
Solids………………………. 55% +/- 2%                        Solids……..… 0
Spindle …………………… #4@20 rpm                       Spindle…..……. B

Application
Used on label and single face laminations via roll coating applicators. Adhesive can be foamed.

Handling & Storage

Diluent:                          Water, if required. Use as received.
Clean up:                       Water.
Storage container:    Store in a cool, dry area. Product should not be stored in direct sunlight. Product should not be used after freezing.  For best results, we recommend the purchase of fresh adhesive every 3 months.

Components contained in this product conform to USDA and FDA regulations for use in food packaging, as stated in the Federal Food and Drug and Cosmetic Act, Title 21 under section 175 – 105. This guarantee is also intended to comply with USDA’s “Policy Governing Inspection of Packaging Materials”..

Note: The data presented is based upon tests believed to be reliable; however, RapidBond, Inc. does not guarantee their accuracy or completeness. RapidBond, Inc., assumes no responsibility for results obtained or for incidental or consequential damages arising from the use of this data.

RapidBond, Inc, LLC Guarantee

If any product is defective in workmanship or materials, RapidBond, Inc., LLC will replace the product, or refund the full purchase price. This warranty is in place of all other warrants, expressed or implied, and all implied warrants of a product for an intended use shall be solely up to the user. RapidBond, Inc., assumes no liability for consequential damages. Its liability shall in no event exceed the purchase price of materials_supplied by it.

To Print Press Here